PROGRAMMING OF COOKING
End of cooking digital programmer (Fig. 15)
In some models it has the function of switching off the
oven at the end of pre-selected cooking time.
The programmer has an electric clock which indicates
the time of day and a timer with an acoustic signal.
Fig. 15 illustrates the programmer's commands;
switches A and B carry out the necessary regulations
foreseen, as follows:
Switch A
Turned in a clockwise direction permits the time shown
on the digital clock to be corrected (at the time of
installation, electricity cuts, to advance or turn back,
etc.).
Switch B
Turned in a clockwise direction sets:
the length of cooking time (max. 210 minutes);
interruption of the acoustic signal (position
manual operation (position
The above signals appear on face C.
C
A B
40
);
).
Fig. 15
Manual operation
The oven can be used normally, i.e. without any
programme. In such case switch B of the programmer
should be turned in a clockwise direction until symbol
il funzionamento manuale del forno (posizione
coincides with the mark on face C.
Programmed operation of the oven
Prearrange the food to be cooked; turn switch B in a
clockwise direction and preset the minutes presumed
for the end of cooking on switch C;
turn the oven switch to the temperature required.
At the end of the established time an acoustic signal
intervenes; to switch off it is sufficient to turn switch B
to symbol
visible on face C, corresponding to the
mark on the face itself.
).