Regulation To Different Kinds Of Gas; Replacement Of Nozzles And Adjustment; Replacement Of Rubber Pipe Holder; Natural Gas Preset Range - Zanussi Gas cooker User Manual

REGULATION TO DIFFERENT
KINDS OF GAS
To adapt the range to a kind of gas different from that
one it is preset to, follow the instructions below in their
order.
Replacement of rubber pipe holder (Fig. 27)
LPG preset range:
to set the range ready for natural ga, use rubber pipe
holder «A».

Natural gas preset range:

To set the range ready for LPG, use the rubber pipe
holder «B» (in the equipment). Always insert the gasket
«C» between the feeding pipe and the rubber pipe
holder. (Fig. 27)
REPLACEMENT OF NOZZLES AND
ADJUSTMENT
Nozzle replacement:
Remove the grills;
extract the caps and the wall baffles of the burners;
using a socket spanner 7 unscrew and remove (fig. 28)
the nozzles replacing them with those ones required for
the kind of gas in use (see table 2).
Reassemble the parts following the same procedure
backwards.
50
Replacement of the fish-kettle burner nozzle:
(For models supplied)
- remove the plate or glass cover by lifting it from the
relevant brackets;
- remove the grills;
- unthread the caps, baffles and burner covers;
- dismount the two cover brackets by unscrewing the
relevant fixing screws (fig. 29);
- lift the surface slightly from the bottom part and
remove pushing it towards the front of the cooker;
- using a no. 7 spanner unscrew and remove (fig. 30)
the nozzle replacing it with the new one (see tab. 2
nozzles).
Remount the parts following the operations described
in reverse.
Fig. 27
Fig. 28
Fig. 29
Fig. 30