Related Manuals for Philips AC4075
Summary of Contents for Philips AC4075
- Page 1 Register your product and get support at www.philips.com/welcome AC4076 User manual...
- Page 4 EnGlIsh Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this new home air purifier, you breathe cleaner air in your new or newly decorated home. For the best result, place the New home air purifier in a room where you spend most of your time, e.g.
- Page 5 - If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
- Page 6 - Make sure all filters are properly installed before you switch on the appliance. - Only use the original Philips filters specially intended for this appliance. Do not use any other filters. - Avoid knocking against the appliance (the air inlet and outlet in particular) with hard objects.
- Page 7 (CO) or radon (Rn). It cannot be used as a safety device in case of accidents with combustion processes and hazardous chemicals. Electromagnetic fields (EMF) This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields. Before first use Placing the filters The appliance comes with all filters fitted inside, but you have to remove the packaging of the filters before you can use the appliance.
- Page 8 EnGlIsh Remove the filters from the appliance. Take out the new filter from the packaging material. Put filter 2 (New home filter) back into the appliance. Note: Make sure that the side with the tag is pointing towards you. Place filter 1 (pre-filter) in the appliance. Note: Make sure that the side with the two projections is pointing towards you. Note: Make sure that all hooks are properly attached to the appliance. To reattach the front panel, insert the bottom hooks into the bottom of the appliance first (1). Then push the panel against the body of the appliance (2).
-
Page 9: Air Quality Indication
EnGlIsh Using the appliance Put the plug in the wall socket All lights go on twice and you hear a beep. Then the lights go out again. Press the on/off button to switch on the appliance. The power-on light, the AUTO light, and the AIR QUALITY light on the control panel go on. The air quality light ring shows the quality of the air. Air quality indication Colour Air quality Blue very good Deep purple good Purple fair To switch off the air quality light ring, press the AIR QUALITY button. Note: The air quality light ring automatically goes on when the appliance is switched on. -
Page 10: Fan Speed Lights/Filter Replacement Lights
EnGlIsh mode causes the appliance to run at high fan speed. You can solve this by cleaning the air quality sensor. If condensation develops frequently during periods of high humidity, we advise you to use one of the manual speed settings. -
Page 11: Auto Mode
EnGlIsh Press the FAN SPEED button to adjust the sensitivity level of the air quality sensor. One of the fan speed lights flashes to show the set sensitivity level of the air quality sensor. Press the on/off button to switch off the appliance. Note: When you change the sensitivity level, the appliance automatically starts operating at the set sensitivity level whenever you switch on the appliance. Auto mode When the appliance is switched on, the built-in air quality sensor automatically measures the ambient air quality. -
Page 12: Night Mode
EnGlIsh night mode The appliance works in harmony with its surroundings. In auto mode, the appliance automatically switches to night mode when the room in which it is operating becomes dark. When the room has been dark for 3 minutes, the lights of the appliance go out, the fan speed and noise level are reduced and the energy consumption is minimised. -
Page 13: Silent Mode
EnGlIsh silent mode When you use the appliance in silent mode, it operates very quietly. Press the on/off button to switch on the appliance. Press the SILENT button to activate the silent mode. The SILENT light goes on. If you want to go back to the FAN SPEED mode or AUTO mode, simply press the FAN SPEED or AUTO button. Cleaning Always unplug the appliance before you clean it. -
Page 14: Air Quality Sensor
EnGlIsh To remove the pre-filter, grab the two projections and pull the filter towards you. Wash the pre-filter under a running tap. If the pre-filter is very dirty, use a soft brush to brush away the dust. Tip: Alternatively, you can clean the pre-filter by removing the dust with a vacuum cleaner. Air-dry the pre-filter. Note: Make sure that the pre-filter is completely dry. If it is still wet, bacteria may multiply in it and shorten the lifetime of the pre-filter. Put the pre-filter back into the appliance. Attach all hooks properly to the appliance. -
Page 15: Filter Replacement
EnGlIsh Clean the air quality sensor, the dust inlet and the dust outlet with a lightly moistened cotton swab. Dry them with a dry cotton swab. Reattach the air quality sensor cover. Filter replacement Filter maintenance This appliance is equipped with the Healthy air protect lock to ensure that the filters are in optimal condition when the appliance is operating. When one of the filters is almost full and has to be cleaned or replaced, the appropriate filter replacement light starts to flash. -
Page 16: Replacing The Filters
EnGlIsh healthy air protect lock If you do not replace the filter in time, the appliance stops operating approx. 2 weeks after the filter replacement light started flashing.When the appliance is locked, it does not operate until you have replaced with the new filter and pressed the reset button. - Page 17 EnGlIsh Put filter 2 (New home filter) back into the appliance. Note: Make sure that the side with the tag is pointing towards you. Put filter 1 (pre-filter) back into the appliance. Note: Make sure that the side with the two projections is pointing towards you. Note: Make sure that all hooks are properly attached to the appliance. To reattach the front panel, insert the bottom hooks into the bottom of the appliance first (1). Then push the panel against the body of the appliance (2).
-
Page 18: Guarantee And Service
By doing this, you help to preserve the environment. Guarantee and service If you need information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone number in the worldwide guarantee leaflet). - Page 19 Fan speed lights 1 country (you find its phone number in the worldwide guarantee leaflet). If and 2 flash, all other lights there is no Consumer Care Centre in your country, go to your local Philips are out. dealer.
- Page 20 © 2013 Koninklijke Philips N.V. All rights reserved. 3140 035 26574...