Table of Contents
Advertisement
2
Press
or
repeatedly to until [ROLL
ON] or [ROLL OFF] is displayed.
3
Turn
to select a setting:
•
[ROLL ON] (scroll on): Auto scroll
during play.
•
[ROLL OFF] (scroll off): No auto
scroll display.
Select shock-protect setting
You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1
Press MENU/DISP for 3 seconds.
2
Press
or
repeatedly until [ESP] is
displayed.
3
Turn
to select a setting:
•
[ESP 10 S]: select this when the road
is smooth and there are few bumps.
•
[ESP 40 S]: select this when the road
is bumpy and unstable.
Reset
You can reset the unit to its default setting.
1
Detach the front panel (see 'Detach the
front panel' on page 21).
2
Press the reset button by using a ball-
point pen or a similar tool.
»
Preset adjustments such as preset
channels and sound adjustments are
erased.
8 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1
Press
to release the panel.
2
Press the left side of the panel rightward.
3
Pull the panel towards you to detach it
from the chassis.
4
Store the panel in the supplied carry case
to protect it from dirt or damage.
Replace fuse
If the fuse is damaged,
1
Check the electric connection.
2
Buy a fuse that matches the voltage of the
damaged fuse.
EN
21
Advertisement
Table of Contents
