Rtc Battery - HP Mini 210 Maintenance And Service Manual

4. Remove the battery (see
5. Remove the service door (see
Remove the memory module:
1. Pull away the retention clip (1) on each side of the memory module to release the module. (The
memory module (2) tilts up.)
CAUTION:
the components on the memory module.
2. Remove the memory module (3) by pulling the module away from the slot at an angle.
NOTE:
Reverse this procedure to install the memory module.

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Battery on page
Service door on page
To prevent damage to the memory module, hold it by the edges only. Do not touch
Memory modules are designed with a notch (4) to prevent incorrect insertion.
44).
45).
Component replacement procedures
Spare part number
599516-001
49