4.
Remove the battery (see
5.
Remove the service door (see
Remove the RTC battery:
1.
Lift the edge (1) of the battery from the system board.
2.
Remove the RTC battery (2) from the socket on the system board.
Reverse this procedure to install the RTC battery. When installing the RTC battery, be sure the "+"
sign faces up.
Hard drive
NOTE:
The hard drive bracket is included in the Hard Drive Hardware Kit, spare part number
651899-001.
Description
Hard drive:
500 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm (select models only)
320 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm
250 GB, 9.5 mm (0.37 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm
320 GB, 7.0 mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm
250 GB, 7.0 mm (0.28 in) × 6.35 cm (2.50 in), parallel SATA, 5400-rpm
Hard Drive Hardware Kit
50
Chapter 4 Removal and replacement procedures
Battery on page
44).
Service door on page
45).
Spare part number
634932-001
622643-001
622641-001
645193-001
645191-001
651899-001