HP Mini 210 Maintenance And Service Manual page 76

Description
Intel Atom N475 single-core, 1.83 GHz processor, 512 KB level 2 cache, 667 MHz FSB, XSLOT
(HP Mini 210 models)
Intel Atom N570 dual-core 1.66 GHz processor, 1 MB level 2 cache, 667 MHz FSB
Intel Atom N570 dual-core 1.66 GHz processor, 1 MB level 2 cache, 667 MHz FSB, XSLOT
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Disconnect the hard drive cable from the system board (see
7. Disconnect the WLAN antenna cables from the WLAN module (see
8. Disconnect the WWAN antenna cables from the WWAN module (see
on page
9. Remove the keyboard (see
10. Remove the top cover (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
WLAN module (see
●
WWAN module (see
●
Memory module (see
●
RTC battery (see
Remove the system board:
1. Remove the 2 Phillips M2.0x5.0 screws (1) that secure the system board to the base enclosure .
2. Starting in the middle of the system board, lift the system board up, and then lift the right side of
the system board (2) until it rests at an angle.
68 Chapter 4 Removal and replacement procedures
Battery on page
Service door on page
47).
Keyboard on page
Top cover on page
WLAN module on page
WWAN module on page
Memory module on page
RTC battery on page
44).
45).
Hard drive on page
53).
56).
46)
47)
48)
49)
Spare part number
650741-001
650739-001
650742-001
50).
WLAN module on page
WWAN module
46).