Performing Network-Wide Remote Diagnostics - GE MDS 4710A Technical Manual

MDS 05-3305A01, Rev. E
4. Measure the radio's RSSI using one of the following methods:
• With an HHT (see
MING on Page
• With GE MDS Radio Configuration Software (see
Upgrading the Radio's Software
• With a voltmeter connected to Pin 21 of the
connector (See
5. With a non-metallic adjustment tool, adjust each section of the
helical filters for maximum RSSI. Re-install the cover to the trans-
ceiver.
FRONT PANEL
OF RADIO
Figure 12. Helical Filter Locations

6.3 Performing Network-Wide Remote Diagnostics

Diagnostics data from a remote radio can be obtained by connecting a
laptop or personal computer running GE MDS InSite NMS software to
any radio in the network.
forming network-wide remote diagnostics.
MDS 4710/9710 Technical Manual
Section 4.0, TRANSCEIVER PROGRAM-
15).
on Page
Section 3.2, RSSI Measurement
Invisible place holder
U202
U203
HELICAL
ADJUSTMENTS
J301
Figure 13 shows an example of a setup for per-
Section 6.5,
40).
DATA INTERFACE
on Page 14).
U104
U101
SHIELD
COVER
37