Turning The Power Off - Epson P-2500 User Manual

Proof Sign-off:
YIT N.Yoshida, A.Seki
T.Takahashi
YIT J.Scarborough
3. The Date and Time screen appears. Select the
setting to change using the Up or Down key and
press the OK key.
Date and Time
Year 2006
Month 2
Day 15
Hour 14
Minute 25
Date Format MM/DD/YYYY
4. Press the Up or Down key to change the value of
the setting and press the OK key.
5. Repeat steps 2 and 3 until you finish the date and
time settings.
6. After you finish all settings, press the Cancel
key to complete.
Note:
❏
Even if you remove the battery, the data and time
settings will be maintained for approximately one day.
R4CG710
User's Guide Rev. E
GET.FM A5 size
2/1/06
❏
If the date and time settings are erased, the Date and
Time screen is displayed when you turn on this device
next time.
❏
After changing the battery, make sure that the date
and time is set correctly. If necessary, set the date and
time again.
❏
You can change the settings later. For details, see
"Changing the Device Settings" (page 54).

Turning the power off

1. Make sure that the Access lamp is off.
Getting Started
R
2
2
2
2
2
2
2
2
2
2
11