Epson P-2500 User Manual page 89

Proof Sign-off:
YIT N.Yoshida, A.Seki
T.Takahashi
YIT J.Scarborough
❏
To prevent fire or electric shock, do not cover the
AC adapter with a blanket or similar covering.
❏
Position this device's power cable so that it will
not be stepped on or run over.
❏
Do not place any objects on the power cable and
the AC adapter.
❏
Keep the power cable straight at the ends and at
the points where it enters the transformer.
❏
The power cable should be placed so as to avoid
abrasions, cuts, fraying, crimping, kinking, and
other damage.
❏
If the AC plug does not fit your outlet, have a
proper outlet installed by a qualified electrician.
❏
Remove the AC plug from the outlet during
lightning storms.
For US and Canadian users:
Use the included power cord or a 6 to 10 foot
UL-approved type SPT-2 or heavier type, 2 × 18 AWG
cord with a 125 V 10 A plug and 125 V 7 A connector.
R4CG710
User's Guide Rev. E
APSPE.FM A5 size
2/1/06
When using a memory card
❏
Only memory cards designed for the device's
specifications can be used.
❏
Do not remove a memory card or turn off the
device while the Access lamp is flashing. See
"Parts" (page 4) to find where the Access lamp
is.
When using the LCD
❏
The LCD panel on this device may contain a few
small bright or dark spots. These are normal and
do not mean that your LCD panel is damaged in
any way.
❏
If the LCD panel on this device is damaged,
consult your dealer.
❏
If the liquid crystal solution contained in the LCD
panel on this device leaks out and gets onto your
hands, wash them thoroughly with soap and
water. If it gets into your eyes, flush them
immediately with water. If discomfort or vision
problems remain after a thorough flushing, see a
doctor immediately.
A
A
A
A
A
A
A
A
A
A
83
Appendix
R