Troubleshooting - Electrolux EN18WI30LS Use And Care Manual

Troubleshooting-1

Unit does not attempt to ignite
when water is running.
Unit attempts to ignite but fails.
Hot water is not available
when a fixture is opened.
No water is available when
a fixture is opened.
The hot water is not the correct
temperature.
Water takes time to become hot
when turning the hot water fixture.
The water is too hot.
The water is not hot enough.
24
Initial Operation
Temperature
( p.12 and p.13)
temperature to be higher than the temperature set on the
remote controller.
is possible for the temperature to be higher than the
temperature set on the remote controller.
( p.12 and p.13)
is possible for the temperature to be lower than the
temperature set on the remote controller.
Decrease the amount of hot water passing through the unit
and the temperature should stabilize.
p.23)
p.23)