Using The Command-Line Interface To Manage Your Appliance - Nokia IP200 Series Installation Manual

3
Performing the Initial Configuration
Nokia Network Voyager Reference Guide for Nokia
IPSO
The Nokia Network Voyager Reference Guide is the comprehensive reference
source for Nokia Network Voyager. To access this source if you are running
Nokia IPSO, click Doc.
You can also access the Nokia Network Voyager Reference Guide for IPSO
and other Nokia IPSO documentation at the Nokia support site
support.nokia.com) or on the software CD that was delivered with your
appliance (see the doc folder).
Nokia Network Voyager Inline Help for IPSO
You can access inline help when you use Nokia
help is the context-sensitive information source for
To access inline help for the window you are viewing, click Help. Close and
Print buttons are available at the bottom of each inline help window you view.
Using the Command-Line Interface to Manage
Your Appliance
You can also use the Nokia IPSO command-line interface (CLI) to manage
and configure Nokia IP security platforms from the command line.
Everything that you can accomplish with Network Voyager you can also do
with the CLI.
Log on to the platform by using a command-line connection (SSH, console, or
Telnet) over a TCP/IP network as an admin, cadmin, or monitor user:
If you log in as a cadmin (cluster administrator) user, you can change and
view configuration settings on all the cluster nodes. For information about
how to administer a cluster, see the traffic management commands
section in the CLI Reference Guide for the version of IPSO you are using.
48 Nokia IP200 Series Security Platform Installation Guide
(https://
Network
Voyager. Inline
Network
Voyager.