Basic Controls - Panasonic TH-50PB2W Operating Instructions Manual

Basic Controls

Main Unit
Brightness Sensor
Detects the brightness in the viewing environment
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit will
still consume some power as long as
the power cord is still inserted into the
wall outlet.)
• Standby ........ Red
Orange (When "Slot power" is set to
"On" and Terminal Board is installed.
See page 52)
Orange (Depending on the type of the function board installed, when the power is supplied to
the slot)
Orange (When "Control I/F Select" is set to "LAN" or "WEB Control" is set to "On". Refer to
"Operating Instructions, Network Operations")
Orange (When "Quick WHITEBOARD Launch" is set to "On". See page 34)
Orange (When "Standby pen charging mode" is set to "On" or "On[4hrs]". See page 35)
• Power-ON ...... Green
• PC Power management (DPMS)
......................... Orange (With PC input signal. See page 42)
• DVI-D Power management
......................... Orange (With DVI input signal. See page 42)
INPUT MENU -/ VOL
Volume Adjustment
Volume Up "+" Down "–"
When the menu screen is
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 22)
Enter / Aspect button
(see page 19, 22)
+
/ ENTER/
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 22)
Normal Viewing
Sound Pos./Size
INPUT button
(INPUT signal selection)
(see page 16)
Picture
Setup
17