Touch-Pen Settings - Panasonic TH-50PB2W Operating Instructions Manual

Touch-Pen Settings

Set Touch Pen mode.
Select "Touch-Pen Settings" in "Setup" menu and press
Touch-Pen Settings
Touch-Pen Mode Touch Only
WHITEBOARD function
Quick WHITEBOARD launch
SLOT INPUT
VIDEO
COMPONENT
HDMI
DVI
PC
NETWORK
Standby pen charging mode
Pairing
Pen adapter status
Touch-Pen Mode
Select an appropriate setting for the function of the electronic pen used.
Touch Only: Contact-type Touch Pen
Touch & Remote: Contact-type Touch Pen and remote pointer
WHITEBOARD function
Sets the built-in WhiteBoard (WhiteBoard mode) function. When this is set to "On", the built-in WhiteBoard function is
enabled and the WHITEBOARD input can be selected.
Quick WHITEBOARD launch
When this is set to "ON", the built-in WhiteBoard will be in the standby mode when the plasma display is in the standby
mode (power OFF with remote control) and the start up is quicker.
Note:
This setting is automatically turned "On" and cannot be changed in the following cases.
When the power is supplied to the slot
When "Control I/F Select" is set to "LAN"
When "WEB Control" is set to "On"
When "Standby pen charging mode" is set to "On"
SLOT INPUT – NETWORK
Set "On" or "Off" for each input terminal.
If you switch to the input terminal that is set to "On", the mode becomes Touch Pen
mode.
"Touch-Pen: On" is displayed in Touch Pen mode.
Notes:
• The picture quality changes according to the settings of "Touch-Pen Mode" and On/Off state of each input
terminal.
• The electronic pen cannot be used during Digital Zoom. (see page 20)
• When using the electronic pen, adjust "Pos./Size" so that the screen of the computer can be correctly displayed.
(see page 23)
Setting the Remote Control
You can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 44)
In Touch Pen mode, the menus and functions are restricted as follows.
Pos./Size menu
Picture menu
Setup menu Extended life settings
Options menu
ASPECT Controls
34
Off
Off
When a Terminal Board with dual input terminals is installed, "SLOT INPUT" is
Off
Off displayed as "SLOT INPUT A" and "SLOT INPUT B".
Off
Off
Off
Pen adapter status
Off
Not detected: Electronic pen adapter is not connected.
Off
Confi rming...: Immediately after connecting an electronic pen adapter and the
Off
Detected
Detected: Electronic pen adapter is connected.
button.
built-in WhiteBoard "Easy WhiteBoard" is starting up.
1:1 Pixel Mode: On
Over scan: Off
Picture Mode: "Normal" or "Dynamic" only. (see page 26)
Picture Mode: "Normal" or "Dynamic" only. (see page 39)
Display size: Unavailable
Rotate: Unavailable
16:9
Touch-Pen
On