Adjusting The Sensitivity Of The Jog Dial's Touch Sensor; Mood Lighting Mode - Pioneer DDJ-WeGO2 Operating Instructions Manual

Adjusting the sensitivity of the jog
dial's touch sensor
This unit is equipped with a mode for adjusting the sensitivity of the jog
dial's touch sensor.
! The value set in the jog dial sensitivity adjustment mode is retained
even when this unit's power is turned off.
1 Turn on the power while pressing the left deck's
[CTRL A] and [FX1] buttons.
The unit starts up in the jog dial sensitivity adjustment mode. Wait until
the startup illumination finishes.
2 Press the [SHIFT] button to select the jog dial's
sensitivity.
The jog dial's sensitivity changes each time the [SHIFT] button is
pressed.
The jog dial's sensitivity is indicated by how the
[HOT CUE (DELETE)/SAMPLER] buttons and [SAMPLER] LEDs light.
Jog dial sensitivity LED that lights
–4 (low) Left deck's [HOT CUE1] button
–3 Left deck's [HOT CUE2] button
–2 Left deck's [HOT CUE3] button
–1 Left deck's [HOT CUE4] button
0* Left and right decks' [SAMPLER] button
+1 Right deck's [HOT CUE1] button
+2 Right deck's [HOT CUE2] button
+3 Right deck's [HOT CUE3] button
+4 (high) Right deck's [HOT CUE4] button
*: Setting upon purchase
3 Press the [f] button.
The jog dial's sensitivity is set.
4 Turn the power off.
The mode for adjusting the jog dial's sensitivity is canceled.

Mood lighting mode

When this mode is set, the brightness of the illumination of the left and
right jog dials automatically changes slowly. This can be used as mood
lighting.
! This mode can be set even if no DJ application is running.
Launching the mood lighting mode
Press the [SHIFT], [DECK C] and [DECK D] buttons simultaneously.
! The mood lighting mode is set automatically if no operation is per-
formed for 10 minutes.
Canceling the mood lighting mode
Operate any one of the control panel's buttons, controls, sliders, jog
dials, etc.
19
En