Hitachi DZ-BD70A Instruction Manual page 108

Notes
• 1080i signals are output from the camcorder's HDMI OUT terminal. When
the camcorder is connected to a TV which is not compliant with 1080i
signals, the message "Playback error has occurred. Change the connection
terminal." appears in the camcorder's LCD display. If the camcorder is
recording or playing when this message is displayed, the operation stops. In
this case, reconnect the cable through another method such as by using the
component terminal. (See also "Troubleshooting" (p.140).)
• If the camcorder is connected to the TV through the HDMI terminal, audio
will not be output from the camcorder other than during playback.
Connecting the camcorder to your TV's component
input
* Do not connect anything to the camcorder's HDMI OUT terminal.
108
The Video and S-Video
cables are not used.
yellow
AV/S cable
Component cable (supplied)
Component
Audio Input
Input
R L
green
red
white
blue
red