Inserting A Bd Or Dvd - Hitachi DZ-BD70A Instruction Manual

Inserting a BD or DVD

Close the lid.
The ACCESS/PC indicator flashes. During this process, do not remove the
power source, shake, or subject the camcorder to impacts.
When a new BD-RE, BD-R, or DVD-RW is inserted, see p.35.
Attach the charged battery pack to the
camcorder or connect the camcorder to a
wall outlet.
Turn the power switch to "OFF".
Then, press down the DISC EJECT switch
until the ACCESS/PC indicator lights, then
release.
After several seconds, the lid pops open.
Open it fully with your hand.
Place the recording surface of the BD/DVD
face down, then push down on the center
of the BD/DVD until it clicks into place.
• For single-sided discs, the side
opposite the label is the recording
surface.
• To record on the other side for
double-sided discs, remove the disc
(p.34), flip it over, and reload it.
33