When Loading A New Bd-Re/Bd-R/Dvd-Rw - Hitachi DZ-BD70A Instruction Manual

When loading a new BD-RE/BD-R/DVD-RW

The disc must be formatted before it can be used for recording. When the disc is
loaded, the format confirmation screen will appear in the LCD monitor. Format
the disc according to the procedure below.
Open the LCD monitor.
The confirmation button
Select "YES" by pressing
Format Disc
Disc is not formatted.
Format the Disc now?
YES
ENTER RETURN
(When using a DVD-RW)
The recording format selection screen appears.
Select "VR Mode" or "VF Mode" by pressing
confirmation button.
Format Disc
Disc format.
Select record format.
VR Mode VF Mode
ENTER RETURN
Note
Be careful that the power is not
accidentally cut off during formatting.
Otherwise, the disc will become unusable.
, then press the confirmation button.
When using a BD-RE/BD-R
Formatting will start. Skip step
When using a DVD-RW
NO
Proceed to step
VR Mode
After recording, you can perform various
editing functions such as choosing and
deleting scenes. You can play back the
disc in a device which supports 8 cm
DVD-RW (VR Mode) after finalizing the
disc.
VF Mode (Video mode)
Although editing cannot be done on the
camcorder, you can play back the disc on
other DVD devices after finalizing the
disc.
.
.
/ , then press the
35