Control Panel Overview - Brother DCP-J925DW Basic User's Manual

Control panel overview

1
1 LCD (Liquid Crystal Display)
This is a Touchscreen LCD. You can access
the menus and options by pressing buttons
displayed on the screen.
Also, you can adjust the angle of the LCD by
lifting it.
2
Lets you return to the Ready mode.
3 Start keys:

Mono Start
Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scan setting in the
ControlCenter software).

Colour Start
Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scan
setting in the ControlCenter software).
6
2
4
You can turn the machine on and off.
Press to turn the machine on.
Press and hold down
off. The LCD will show Shutting Down and
will stay on for a few seconds before going off.
If you turn the machine off using
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.
5 Stop/Exit
Stops an operation or exits the menu.
6 Warning LED
Turns red and blinks when the LCD displays an
error or an important status message.
General information
1
5 4
3
to turn the machine
, it will still
5
1