The following table summarizes the equivalent CLI command for items in the Switch/General/Versions page.
Command
Usage
show
Displays hardware and software version information for the system, as well as the unit's
version
power status
Example
Console#show version
Unit1
Serial number :123456
Service tag :1
Hardware version :/2002
Number of ports :50
Main power status :up
Redundant power status :not present
Agent(master)
Unit id :1
Loader version :0.0.5.5
Boot rom version :0.0.6.2
Operation code version :0.2.0.0
Console#
Logs
The Logs page allows you to scroll through the logged system and event messages. The switch can store up to 2 kilobytes (KB) of log entries in temporary
random access memory (RAM) (memory flushed on power reset) and up to 4 KB of entries in permanent flash memory.