Queue Scheduling - Dell PowerConnect 3248 System User's Manual

Console(config-if)#queue cos-map 2 4 5
Console(config-if)#queue cos-map 3 6 7
Console(config-if)#exit
Console(config)#exit
Console#show queue cos-map
Information of Eth 1/1
Queue ID Traffic class
-------- -------------
0 0 1 2
1 3
2 4 5
3 6 7
.
.
.

Queue Scheduling

In the Queue Scheduling page, you can configure Weighted Round Robin (WRR) queueing for the switch ports.
The following options are available:
WRR Setting Table — Displays a list of weight values for each switch CoS queue
l
Weight Value — Sets a new weight value for a CoS
l
To change a table setting, select the entry in the WRR Setting Table, type the new weight in the Weight Value box, and then click Apply Changes. If you
don't want to save the changes, click Refresh.
CLI Commands
The following table summarizes the equivalent CLI commands for items in the Class of Service/Queue Scheduling page.
Command
queue bandwidth weight1...weight4
show queue bandwidth
Example
Console(config)#queue bandwidth 1 4 16 64
Console(config)#exit
Console#show queue bandwidth
Queue ID Weight
Usage
Assigns WRR weights to the four CoS priority queues.
Use the no form command to restore the default weights.
Displays the WRR bandwidth allocation for the four CoS priority queues.