Table of Contents
Advertisement
TIMER
If the channel you wish to check is not on the TV screen, press SELECT or
ADD/DELETE button repeatedly to change the displayed page.
3) Press MENU button to return to the TV mode.
VCR PLUS+ TIMER RECORDING
You can program the timer using the VCR Plus numbers that are printed in
most newspaper TV listings and TV guide. You can set 8 programs to record
within a 1 year period.
NOTE: You must use the remote control for this procedure.
Make sure...
• Be sure the clock is set to the correct time and date before setting the VCR
plus+ timer.
• Power must be turned on to set VCR plus+ timer recording.
• Insert a cassette tape with its erase prevention tab in place. (If necessary,
rewind or fast forward the tape to the point at which you want to begin
recording.)
Avoid over lap of programs...
There is a case that a program will not be performed. When programs
overlap;
• The program with the earliest start time has priority.
• When the earliest program has finished and the programs which should start
still overlap, the recording will start in the order of the program number.
• If you programmed as the illustration, the timer recording would be carried
out as follows (shaded part is the recording period):
9:00AM - 10:00AM for PROGRAM 2
10:00AM -
1 Select VCR plus+ mode
Press VCR PLUS+ button.
• When timer recordings have already been filled, "PROGRAM 12345678"
appears. In this case, you must cancel or change program(s) as necessary.
1) Press CH
appears.
2) Press ADD/DELETE button.
3) Press MENU button to return to the TV mode.
• If you did not set the clock, "MANUAL CLOCK SET" appears. If so, follow
page 15 to set the clock and repeat from step [3].
2 Set VCR plus+ code
for PROGRAM 1
or
button repeatedly until your target program number
50
Advertisement
Table of Contents
