The MB1500EB01 and MB1500EB01Q are the evaluation board for MB15E0xSL and MB15E0xSR. The difference of the evaluation board part number is the package type. MB1500EB01 is for TSSOP or SSOP package. MB1500EB01Q is for QFN package. You can evaluate almost performance for PLL with the evaluation board.
Regarding the board for QFN package, there is no switch for controlling Power saving. Please TP3 shorts to VCC or GND to operate PLL. Device (PLLIC) information The evaluation board, MB1500EB01 can evaluate the following devices. Data sheet number Function...
2012.Apr.Rev6.0 5.2.Board layout MB1500EB01(SSOP package) Top layer Bottom layer OSCin PS-Low PS-High LD/fout DATA Vvco 1pin MB1500EB01B(QFN package) MB15E07SL,MB15E03SL only Top layer Bottom layer 1pin LD/fout ΦP ΦR OSCin Data Clock OSCout VCO area Vvco LPF area Please connect between Do and LPF line.
2012.Apr.Rev6.0 6.0.Typical Test Data(Ex.MB15E07SR) 6.1Measurement Condition The data is measured under GSM application using MB15E07SR which has the feature of low noise. Power supply voltage: :Vcc=Vp=3.75V Oscillator frequency: :fosc=13MHz Charge pump current: :ICP=1.5mA Comparison frequency: :fr=200kHz VCO frequency: :fvco=1730MHz to 1805MHz VCO gain :42MHz/V(Vvco=3.3V) RF Loop filter...
2012.Apr.Rev6.0 7.0 Additional information Option There are two types of Software and Hardware for setting serial data. Fujitsu provides the software and hardware. The software can work under NT, 2000 and XP. MB1500EB00A_Parallel port version -Cable -Software -Manual - 11 -...