Programming The Ip Proprietary Telephone; Assigning The Ip Addressing Information - Panasonic Hybrid IP-PBX Manual

4.2 Programming the IP Proprietary Telephone

4.2 Programming the IP Proprietary Telephone
4.2.1

Assigning the IP Addressing Information

When Assigning IP Addresses to IP-PTs Using a DHCP Server
When using a DHCP server to automate IP address assignment of IP-PTs, only the IP address of the IP-
EXT16 card (PBX IP address) must be entered manually.
Other addresses (i.e., the IP address of the IP-PT, the subnet mask address, and the default gateway
address) will be assigned automatically by the DHCP server.
Follow the procedure below for all IP-PTs on the LAN that a DHCP server is used.
If you need to set VLAN parameters, follow the procedure described in "4.2.2 Setting the VLAN Parameters"
after assigning the IP addresses without ending programming.
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
To enter the IP address of the IP-EXT16 card (PBX IP Address)
Return to the
Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
STORE
Press "STORE".
* Valid IP address range: "1.0.0.0" to "223.255.255.255"
30 Information about IP Proprietary Telephones
SETUP
Press "SETUP"
when it is displayed.
ENTER
Select "Enable" for
DHCP setting.
ENTER
Select "PBX".
The IP-PT will reboot
and establish connection
to the network.
PBX IP Address*
ENTER