Installing A Cmc Card; Pcie Cage - Dell PowerEdge VRTX Owner's Manual

3. Holding the release tabs, lift the CMC card from the CMC connector and slide it out of the card support bracket.
Figure 55. Removing and Installing a CMC Card
1. CMC card connector on system board
3. CMC card indicators (2)
5. CMC card support bracket

Installing A CMC Card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1. Align the CMC card with the card support bracket, and holding the release tabs, slide it down the bracket.
2. Lower the CMC card into the CMC connector on the system board.
3. Lock the CMC card into the CMC connector by rotating the release tabs downward, until firmly seated.
4. Close the system.

PCIe Cage

The PCIe cage consists of the following:
2. release tabs (2)
4. CMC card
81