Motorola MK3000 Product Reference Manual page 56

5 - 14 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide
Downloading the Image using IPL
After building the hex file, download it to the MK3000 using IPL.
Hold the MK3000's right and left buttons until the mobile computer resets into IPL. The
1.
menu appears.
Loader
Connect the MK3000 to the host computer.
2.
Initial Program Loader
Platform
Application
Config Block
Windows CE
Monitor
Splash Screen
Partition Table
System Reset
Auto Select
Initial Program Loader (IPL) Menu
Figure 5-11
CAUTION
NOTE If the platform or application partition sizes are changed, you must first download a new partition table.
Choose Auto Select or use the up and down scroll buttons to select the partition to download, then press
3.
Enter.
IPL Menu Partitions
Table 5-2
Partition Name
Platform
Application
Windows CE
Monitor
Splash Screen
To ensure a successful download, do not remove power from the mobile computer while in IPL mode.
Contains the files in the
Contains the files in the
Contains the operating system for the mobile computer.
Contains the Monitor and IPL programs.
Contains the splash screen that displays while booting the mobile computer.
Note: Splash screens are generated from .bmp images and must be less than or equal to
240 pixels wide and 296 pixels deep. For mono displays, the bmp image must be 4 bpp
and for color screens the color depth must be 8 bpp. Note: 8 bits per pixel only applies to
splash screen images. Once Windows CE is running, the color density is 16 bits per pixel.
Description
folder.
Platform
folder.
Application
Initial Program