Motorola MK3000 Product Reference Manual page 62

5 - 20 MK3000 MicroKiosk for Windows CE 5.0 Product Reference Guide
IPL Error Detection
While receiving data, IPL performs many checks on the data to ensure that the device received the data
correctly. If IPL detects an error, it immediately aborts the download and reports the error on an error screen.
This screen displays until you press any key, then IPL returns to the
for a new selection.
To find the probable cause of the error, use the error number and/or the error text displayed on the screen to
look up the error in
IPL Errors
Table 5-4
Error Text
Unknown error
Cancelled by user
Can't open the source
Can't open the
destination
Can't read from the
source device
Can't write to the
destination device
Transmission checksum
error
Readback checksum
error
There is no more heap
space available
Insufficient data available
to complete record
Invalid Symbol HEX file
Unrecognized or
unsupported HEX record
Table 5-4.
Error
Number
-1 A general error occurred. Retry the download. If the failure persists,
it is most likely due to a hardware failure; the mobile computer
requires servicing.
-2 The user canceled the download.
-7 An error occurred opening the source device (either radio card or
Serial port). Check source device connectivity and retry.
-8 An error occurred opening the destination device (either flash ROM
or Power Micro). Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires
servicing.
-9 The source device (either radio card or Serial port) could not be read
from. Check source device connectivity and retry.
-10 The destination device (either flash ROM or Power Micro) could not
be written to. Retry the download. If the failure persists, it is most
likely due to a hardware failure; the mobile computer requires
servicing.
-11 An error occurred during transmission from the source device (either
radio card or Serial port) and the checksum check failed. Check
source device connectivity and retry.
-12 A checksum, generated from reading back data that was written to
the destination device, was incorrect. An error during transmission or
a write error to the destination device could cause this.
-14 There is no more heap space available for the download procedure.
Restart IPL and retry the download. If the failure persists, contact
service with details of what is being downloaded.
-21 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.
-23 A Symbol HEX file download was attempted but the HEX file is
invalid. Ensure the file is in Symbol HEX file format.
-24 The Symbol HEX file being downloaded contains an invalid or
unrecognized HEX record. Ensure the file is in proper Symbol HEX
file format.
main menu to wait
Initial Program Loader
Probable Cause