Making N In 1 Copies - Brother MFC-L8600CDW User Manual

Making N in 1 copies

(page layout)
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see 2
in 1 ID Copy on page 51.
IMPORTANT
• Make sure the paper size is set to A4,
Letter, Legal, Folio , A5
1
For 2 in 1 ID Copy
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
• (P) means Portrait and (L) means Landscape.
a
Load your document.
b
Press (Copy).
c
Enter the number of copies.
d
Press Options.
e
Swipe up or down, or press a or b to
display Page Layout.
f
Press Page Layout.
g
Swipe up or down, or press a or b to
display Off(1in1), 2in1(P),
2in1(L), 2in1(ID)
4in1(L).
1
For information about 2in1(ID), see 2 in 1
ID Copy on page 51.
h
Press the option you want.
i
If you do not want to change additional
settings, press OK.
j
Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF, the
machine scans the pages and starts printing.
7
1 1
or B5 .
1
, 4in1(P) or
If you are using the scanner glass, go
to step k.
k
After the machine scans the page, press
Yes to scan the next page.
l
Place the next page on the scanner
glass.
m
Press OK.
Repeat steps k to m for each page of
the layout.
n
After scanning all the pages, press No in
step k to finish.
If you are copying from the ADF:
Place your document face up in the direction
shown in the illustration:

2in1(P)

2in1(L)

4in1(P)

4in1(L)
Making copies
7
7
49