Installing The Dualpoint™ Integrated Pointing Device Drivers - Dell Inspiron 3800 System Reference Manual

Utilities and Drivers for Microsoft Windows NT: Dell Inspiron 3800 System Reference
2. Insert the System Software CD into the CD-ROM drive.
3. Click the Start button, and then click Run.
The Run dialog box appears.
4. Type x:\winnt4\docking\setup, where x is the drive letter of your CD-ROM drive,
and click OK or press <Enter>.
5. Follow the instructions on the screen.
6. When the installation is complete, click OK.
7. When the Reboot Now dialog box appears, remove the System Software CD from the
CD-ROM drive, and click Restart Now to reboot your computer.
Installing the DualPoint™ Integrated Pointing Device Drivers
DualPoint integrated pointing device drivers and associated utilities allow you to use and
customize the integrated touch pad, track stick, or an external mouse. To install these drivers,
perform the following steps.
NOTICE: Use these steps to install touch pad drivers only if your computer
has a track stick. If your computer does not have a track stick, follow the
instructions in "Installing the Touch Pad
1. Save your work in all open application programs, because you will need to restart your
computer at the end of this procedure to complete the installation.
2. Insert the System Software CD into the CD-ROM drive.
3. Click the Start button, and then click Run.
The Run dialog box appears.
4. Type x:\winnt4\touchpad\dual\setup, where x is the drive letter of your CD-ROM
drive, and click OK or press <Enter>.
file:///F|/Service%20Manuals/Dell/Inspiron/3800/winnt.htm (7 of 11) [2/28/2004 6:58:54 AM]
Drivers."