Miele Dishwasher Operating Instructions Manual page 12

Water softener
To set the water softener for a hard-
ness level of 1-35 gr/gal:
Check that the water hardness selec-
tor in the wash cabinet is set to set-
ting 6.
Turn the dishwasher off.
Turn the program selector knob to
the "STOP" position.
Press the "Delay start" and "START"
buttons at the same time, while turn-
ing the machine on. A "P" and a num-
ber will appear in the time display.
Set the program selector knob to the
"NORMAL 55/130" position. The
number "22" will appear in the time
display.
"22" = The factory setting for a water
hardness of 22 gr/gal.
12
Press the "Top Solo" button as often
as necessary until the value of your
water hardness in gr/gal appears in
the display.
Example:
For a water hardness of 30 gr/gal:
Keep pressing the "Top Solo" button
until "30" appears in the time display.
After the figure "36" is reached the
counter returns to "0".
Value "0" must not be set!
Press the "START" button twice to
store the change in memory.