Program Chart - Miele Dishwasher Operating Instructions Manual

Program chart

Program chart
Program
NORMAL
55 °C/130 °F
NORMAL
65 °C/150 °F
INTENSIVE
55 °C/130 °F
INTENSIVE
65 °C/150 °F
ENERGY SAVER
POTS & PANS
75 °C/170 °F
ECONOMY
55 °C/130 °F
CHINA & CRYSTAL
45 °C/115 °F
SHORT
45 °C/115 °F
RINSE & HOLD
The dispensing method will depend on the type of detergent being used:
1)
A Use this method for:
– detergents which contain phosphates and chlorine.
Divide the total amount, as shown, between compartment I and compartment II.
2)
B Use this method for:
– detergent which is chlorine and phosphate free.
– detergent which is chlorine free but contains phosphates.
In this instance the whole amount is placed in compartment II.
3) Use half of the manufacturers recommended amount of detergent.
26
When to use
Universal Programs
This program is for normal everyday loads.
Same as NORMAL 55 °C/130 °F, but at a
higher temperature for stubborn dried on
particles.
Same as NORMAL 55 °C/130 °F, but with a
preliminary pre-wash for heavy soiling.
Same as INTENSIVE 55 °C/130 °F, but at a
higher wash temperature for stubborn dried
on particles and lightly soiled pots and pans.
Special programs
Only select ENERGY SAVER if the dish-
washer is connected to a hot water supply
(minimum temperature 45 °C/115 °F).
– see chapter "Choosing a program"
For pots, pans and dishware with dried on
particles of food and very heavy soiling.
For half a, normal everyday load, or:
for full loads with very light soiling (e.g.
coffee cups).
"Gentle program", for lightly soiled and
heat sensitive tableware.
"Quick program", for lightly soiled
dishware (e.g. party dishware).
For rinsing dishes when a complete cycle
is not needed.
Detergent
1)
A
Compart- Compart-
ment ment
I II
(Pre-wash) (Main
wash)
20 % 80%
20 % 80 %
20 % 80 %
20 % 80 %
20 % 80 %
20 % 100 %
3)
50 %
3)
50 %
3)
50 %
2)
B
Compart-
ment
II
(Main
wash)
100 %
100 %
100 %
100 %
100 %
120 %
3)
50 %
3)
50 %
3)
50 %