Date/Time Setup - Siemens SISTORE AX9 User Manual

3.5.2

Date/Time Setup

Siemens Building Technologies
Fire & Security Products
Highlight Date/Time in the Main Menu and press the
setup screen appears.
Fig. 26 Date/Time setup screen.
If you set a date and time that is older than some of your recorded images, any
CAUTION
images with dates and times later than the new setting will be deleted.
Highlight the first box beside Date/Time and press the
sections of the date will highlight. Use the Up and Down arrow buttons to change
the number. Use the Left and Right arrow buttons to move between month, date
and year. Once you have the correct date, press the
Highlight the second box beside Date/Time and press the
individual sections of the time will highlight. Use the Up and Down arrow buttons
to change the number. Use the Left and Right arrow buttons to move between
hour, minutes and seconds. Once you have the correct time, press the
button.
NOTE:
The clock will not start running until you have restarted the unit, so you may wish to set the time last.
Highlight the box beside Time Zone and press the
zone you are in from the list and press the
Highlight the box beside Daylight Saving Time and press the
Pressing the button toggles between On and Off.
Highlight the Holiday Setup... box and press the
holidays by highlighting Add: and pressing the
appears.
Highlight the month and day and change them by using the Up and Down arrow
buttons. Press the
highlighting the X beside the date and pressing the
NOTE:
Holidays that do not fall on the same date each year should be updated once the current year's
holiday has passed.
button.
button to add the date. Dates can be deleted by
Configuration
button. The Date/Time
button. The individual
button.
button. The
button. Select the time
button.
button. You can set up
button . The current date
button.
SISTORE AX9 AX16_EN.doc
29
09.2004