Siemens SISTORE AX9 User Manual page 30

Configuration
30
Siemens Building Technologies
Fire & Security Products
Fig. 27 Holiday Setup screen.
You can save your changes by highlighting OK and pressing the
Selecting Cancel exits the screen without saving the changes.
Highlight the Time Sync... box and press the
synchronization between the DVR and standard time servers that are available
in most time zones and countries or between the DVR and another DVR.
Fig. 28 Time Sync screen.
Highlight the box beside Automatic Time Sync and press the
toggles between On and Off.
Highlight the box beside SNTP Server and press the
numbers by highlighting them and using the Up and Down arrow buttons to
increase or decrease the number value.
Highlight the box beside Interval and press the
for synchronization from 1 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server.
Highlighting the Update button and pressing the
clock.
NOTE:
The Server Clock will display "
–
" when the DVR cannot load the time information from the time server.
button .
button. You can set up time
button. This
button. Change the
button. Set the time interval
button updates the server
SISTORE AX9 AX16_EN.doc
09.2004