Avocent Ikvm Analog Switch Module (Optional) - Dell PowerEdge M1000E BMX01 Owner's Manual

Indicator Description
Fan power indicator
Solid Green
Off
Fan fault indicator
Amber

Avocent iKVM Analog Switch Module (Optional)

• Local iKVM access can be remotely disabled on a per blade basis, using the blade's iDRAC interface (access is
enabled by default).
NOTE: By default (enabled), a console session to a given blade is available for both the iDRAC interface and iKVM
(users connected to a blade's console using iDRAC and the iKVM see the same video and are able to type
commands). If not required, sharing can be disabled using the iDRAC console interface.
• One VGA connector. The iKVM supports a video display resolution range from 640 x 480 at 60 Hz up to 1280 x
1024 x 65,000 colors (non-interlaced) at 75 Hz.
• Two USB ports for keyboard and mouse.
NOTE: The iKVM USB ports do not support storage devices.
• RJ-45 Analog Console Interface (ACI) port for tiering with Dell and Avocent analog KVM and KVM over IP
switches with Analog Rack Interface (ARI) ports.
NOTE: Although the ACI port is an RJ-45 connector and uses Cat5 (or better) cabling, it is not an Ethernet network
interface port. It is only used for connection to external KVM switches with ARI ports, and does not support native
KVM over IP.
• The iKVM can also be accessed from the front of the enclosure, providing front or rear panel KVM functionality,
but not at the same time. For enhanced security, front panel access can be disabled using the CMC's interface.
NOTE: Connecting a keyboard, video, and mouse to the enclosure front panel disables video output to the iKVM
back panel port. It does not interrupt iDRAC video and console redirection.
• You can use the iKVM to access the CMC console directly, using RACADM or using the web-based interface.
For more information, see Using the iKVM Module in the CMC User's Guide at support.dell.com/manuals.
16
The fan is receiving DC power and working properly.
The fan has failed.
The fan is in a fault condition.