n
Blade
Mezz_FAB_B_Blade
n_Port1
Mezz_FAB_B_Blade
n_Port2
Mezz_FAB_B_Blade
n_Port3
Mezz_FAB_B_Blade
n_Port4
Mezz_FAB_C_Blade
n_Port1
Mezz_FAB_C_Blade
n_Port2
Mezz_FAB_C_Blade
n_Port3
Mezz_FAB_C_Blade
n_Port4
I/O Module Port Mapping—Quarter-Height Blades
NOTE: Up to four quarter-height blades are installed in a sleeve. This section includes all four blades when
referring to a sleeve.
Standard LOM (Dual-Port) Mapping
Each LOM has two port connections. For a sleeve in enclosure slot
•
Blade a LOM connection 1 connects to I/O module A1, port
(n+16) .
•
Blade b LOM connection 1 connects to I/O module A2, port
(n+16) .
•
Blade c LOM connection 1 connects to I/O module A1, port
(n+24) .
port
•
Blade d LOM connection 1 connects to I/O module A2, port
(n+24) .
port
For example, in a sleeve in enclosure slot 8:
•
Blade a LOM connection 1 connects to I/O module A1, port 8, and connection 2 connects to I/O module A2, port
24.
•
Blade b LOM connection 1 connects to I/O module A2, port 8, and connection 2 connects to I/O module A1, port
24.
•
Blade c LOM connection 1 connects to I/O module A1, port 16, and connection 2 connects to I/O module A2, port
32.
•
Blade d LOM connection 1 connects to I/O module A2, port 16, and connection 2 connects to I/O module A1, port
32.
46
n
Port
(n+16)
Port
n
Port
(n+16)
Port
I/O Module
n
Port
(n+16)
Port
n
Port
(n+16)
Port
n :
n , and connection 2 connects to I/O module A2, port
n , and connection 2 connects to I/O module A1, port
(n+8) , and connection 2 connects to I/O module A2,
(n+8) , and connection 2 connects to I/O module A1,