Pci Hot Plug Function; Security And Encryption Function; Trusted Platform Module (Tpm); Physical Partitioning (Ppar) - Fujitsu PRIMEQUEST 2000 Series General Description Manual

CHAPTER 1 Product Overview
1.4 Hardware technologies
Installation RAID
Component
SB/DU SAS RAID controller
card
When two SAS RAID controller cards are installed in a DU, there would be up to two HDDs connected to a
SAS RAID controller card.
Activation of HDD/SSD can be increased even when using a hardware RAID.
For details, see 'Modular RAID Controller/ Modular SAS HBA', 'MegaRAID SAS Software' and 'MegaRAID
SAS Device Driver Installation'.

1.4.8 PCI Hot Plug Function

All PCI Express slots in the PCI_Box of the PRIMEQUEST 2000 series support the PCI hot plug function.
This function is a technology that enables extraction or insertion of a PCI card during system operation.
Any PCI Express Slots in the IOU_1GbE and the IOU_10GbE do not support the PCI hot plug function.

1.4.9 Security and Encryption Function

The following security/ encryption function s are supported in the PRIMEQUEST 2000 series.
- Advanced Encryption Standard New Instructions (AES-NI)
- Digital Random Number Generator (DRNG)
- Supervisor Mode Execution Protection (SMEP)
For details on the security functions related to TPM related security, see
(TPM)'

1.4.10 Trusted Platform Module (TPM)

Trusted Platform Module (TPM) is supported in the PRIMEQUEST 2000 series.
Remarks
To use TPM, System Boards with TPM is required to be purchased.
Reserved SB function cannot be used if TPM function is enabled. The TPM is a security chip with the
following functions.
- Data (storage) encryption processing function
- Secret key storage function
- Platform certification
The TPM is enabled by UEFI to enable its function.
The BitLocker and Trusted Execution Technology (TXT) can be used by enabling the TPM.
For details, see '3.4.12 [Security Configuration] menu' in "PRIMEQUEST 2000 Series Tool Reference".

1.4.11 Physical Partitioning (PPAR)

The Physical partitioning divides the hardware resource into multiple systems within the cabinet and
operates independent systems (OS) as divided units.
The PRIMEQUEST 2000 series supports physical partitioning except for PRIMEQUEST 2800B.
The physical partition with any number of resources can be configured by using the flexible I/O mode (*1) in
all models.
*1: For details on the flexible I/O mode, see
The following are the features of the partitioning function.
- Multiple operations can be configured in the same cabinet, thus enabling a flexible system operation.
- Hardware protection to prevent faults in the arbitrary partitions from affecting the other partitions.

TABLE 1.2 Hardware RAID Level

Number of connected
card HDDs/SSDs
1
2
3
4
RAID 0
RAID 0, RAID 1
RAID 0, RAID 1, RAID 5, RAID 6
RAID 0, RAID 5, RAID 6, RAID 1E, RAID 10
'1.4.14 Flexible I/O'.
15
Hardware RAID level
'1.4.10 Trusted Platform Module
C122-B025-02EN