Vga; Mmb (Management Board); Mmb Specifications; Table 2.4 Mmb Specifications - Fujitsu PRIMEQUEST 2000 Series General Description Manual

Primequest 2000 series server
Hide thumbs Also See for PRIMEQUEST 2000 Series:
Table of Contents

Advertisement

CHAPTER 2 Hardware Configuration

2.6 MMB (Management Board)

With the USB Disable function, the SB external port can be set to enable/disable.
For details on the USB Disable function setup, see '3.4.11 [USB Configuration] menu' of the "PRIMEQUEST
2000 Series Tool Reference" (C122-E177EN).

2.5.3 VGA

The VGA function is included in the BMC. Signals are output directly to the external VGA port of the SB. In a
partition configured with multiple SBs, the signals are only from the Home SB.
It is displayed in a maximum of 1600 dot x 1200 dot, 65536 colors.
2.6
MMB (Management Board)
The Management Board (MMB) is a control board having a dedicated processor which differs from that on
the SB.
It mainly controls the following.
-
Partition configuration control in the cabinet
-
Power control
-
Memory Mode setup
-
Resetting
-
Monitoring the sensors
-
Log management
-
Schedule operation
The MMB is operated from a management network via a Web-UI. It can also be operated by connecting a
management terminal to serial port of MMB via the CLI.
The MMB is mounted on the rear of the cabinet.
Remarks
Even one MMB can be operated. Up to two MMBs can be mounted in a cabinet. MMB is duplicated when
two MMBs are mounted in PRIMEQUEST 2400E and 2800E.
For details on the communication between the MMBs, see 'Chapter 1 Network environment setup and
installation of management tool' of "PRIMEQUEST 2000 Series Administration Manual" (C122-E175EN).

2.6.1 MMB specifications

The MMB specification is listed in the table below.
Serial interface COM port
LAN interface
Hot plug
LED
External dimensions (mm) (remove protrusions)
Weight
In each model of the PRIMEQUEST 2000 series, a redundant configuration can be established by mounting
two MMBs.
The following figure shows overviews of the MMB.

TABLE 2.4 MMB specifications

Item
USER port #0/#1 (RJ45)
REMCS port (RJ45)
CE port (RJ45)
Specifications
DB9×1 port (For initial setup)
100 Mbps/1 Gbps × 2 ports
100 Mbps ×1 port
100 Mbps ×1 port
Supported (only in redundancy configuration)
Ready, Active, Alarm, Location
Width 192.6 x Depth 269.2 x Height 31.4
1.2 kg
37
C122-B025-02EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primequest 2400ePrimequest 2800ePrimequest 2800b

Table of Contents