Adjusting The Osd Screen (Dvi And Pc ); Osd Main Menu; Main Adjust; Auto Adjust (Does Not Support Dvi Source) - Siemens CMTC1515 User Manual

Adjusting the OSD Screen (DVI and PC )

6 Adjusting the OSD Screen (DVI and PC )
6.1

OSD Main Menu

6.2

MAIN ADJUST

6.3

AUTO ADJUST (does not support DVI source)

14
Siemens Building Technologies
Fire & Security Products
After the Menu/Exit button is pressed for the first time, the main menu will appear
on screen. The main menu is composed of text and graphics. The OSD shows
different options, and the selected option is highlighted in yellow. Use the ▲/+ and
▼/- buttons to move the yellow bar to select the option. When the yellow bar
reaches the desired option, press the Source/Enter button to select it. Press the
Menu/Exit button once to exit this menu. The contents of the main menu are shown
in Figure 6-1.
NOTE:
Auto Adjust, Sharpness and Image Adjust functions do not support the DVI
input source.
MAIN MENU
MAIN ADJUST
AUTO ADJUST
COLOR ADJUST
IMAGE ADJUST
PIP SETTING
SETUP MENU
INFORMATION
RECALL
Figure 6-1
There are four items on this submenu: BRIGHTNESS, CONTRAST, SHARPNESS
and VOLUME.
BRIGHTNESS: This is used to adjust the brightness of the screen.
CONTRAST: This is used to adjust the image contrast.
SHARPNESS: This is used to adjust the focus of the screen image (does not
support DVI source).
VOLUME: This is used to adjust the sound volume.
This is used for automatic configuration of the phase, clock, vertical and horizontal
positioning of image.
1715 Monitor UG_EN.doc
06.2004