Messages; Troubleshooting; Troubleshooting Criteria - HP 7500 PCI Installation Manual

Hewlett packard pci graphics controller installation guide
Table of Contents

Advertisement

HP-UX Configuration
ATI RADEON 7500 PCI Graphics Controller Installation Guide

Messages

Xserver messages are typically logged to /var/X11/Xserver/logs. The two files that contain the
messages are:
/var/X11/Xserver/logs/Xf86.*.log
/var/X11/Xserver/logs/Xstartup.*.log
Where * is the display instance of the Xserver, which is usually 0. The Xstartup.*.log file contains
messages from the X loader. The Xf86.*.log file contains messages from the Xf86 Xserver. The
Xf86.*.log file is the file that should be checked first, should problems arise.

Troubleshooting

Table
4-2

Troubleshooting Criteria

Problem
Can not boot using VGA
console.
CDE does not start on the
graphics display.
OpenGL applications do not
work.
Blank or corrupt screen.
Visual noise is present on the
monitor.
22
Description
The EFI console has the ability
to display output to any of the
VGA devices. Console output is
only supported on the serial
console for systems with ATI
Radeon 7500 cards installed.
After booting CDE does not
come up on the ATI Radeon
7500 display.
3D applications fail to run or
run very slowly.
The dtlogin process is running
but the monitor is blank or
corrupted.
Flashes, dots, or other random
artifacts are present on the
monitor.
Solution
Connect a serial console and
choose the serial console device
as the Console Output at the
EFI level.
Is a keyboard and mouse
attached? The Xserver will not
start unless a mouse and
keyboard are attached.
Is the Xserver configured with
the correct /dev/gvid devices?
Accelerated 3D is not supported
on the ATI Radeon 7500
graphics card. Some 3D
applications may run through
emulation mode at greatly
reduced performance.
Is the monitor connected to the
correct display connection on
the ATI Radeon 7500 graphics
card?
Does the monitor support the
resolution and refresh rate that
the Xserver is running at?
At high resolutions and refresh
rates this type of problem can
occur on some monitors.
Use only the cables provided
with the monitors.
Lower the refresh rate and/or
resolution.
Chapter 4

Advertisement

Table of Contents
loading

Table of Contents