Appendix A - Access Codes; Co Line Access Codes - Toshiba Strata DK User Manual

Access Codes
This appendix contains access codes for outside Speed Dial (SD) numbers, CO lines,
Paging Group and Paging Zone Codes.

CO Line Access Codes

CO lines are used when you dial an outside number. If your telephone does not have a
&2
button, you can enter the appropriate code listed in
an outside line.
You can also store the code on a
CO Line access code onto a Speed Dial code, enter
(e.g., to store code
In some systems,
(LCR). System users are required to dial
press in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Press [PDN] + CO Line Access Code.
Strata DK Electronic Telephone 5/99
6'
button for one-touch access. If you are storing a
 
, enter
is used as a general group code or to access Least Cost Routing
Table 11 on Page 108

before the CO access code
).
in order to access an outside line. If you
A
to access
107