Speed Dial Pause; Speed Dial Number Linking - Toshiba Strata DK User Manual

The Grand Tour
Speed Dial

Speed Dial Pause

Some Speed Dial numbers may require a pause (long or regular) or hookflash be
included (e.g., tone delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The 0:)/ is
programmed to allow a 0.5
or 2 seconds long (set in
system programming) CO
line hookflash when
inputting Speed Dial
numbers. It is displayed on
the LCD as "
Press 0:)/
...or enter the hookflash
dial code (&21)7516
+ ).
Your telephone must have a 3$8 key to allow 0:)/ to be used to store a hookflash in
Note
Speed Dial.

Speed Dial Number Linking

You can link any of the Station Speed Dial numbers to System Speed Dial codes or to
any of the optional buttons associated with these codes. This enables up to 36 digits to
be stored under one Station
used access numbers are stored as part of this digit string. The System Speed Dial
number dials out first, then the number linked to it.
A designated station can be used to link System Speed Dial codes. See the
Note
System Administrator's User Guide.
Important!
66
The pause is either 1.5 or 3
seconds (set in system
programming). The LCD
displays "
Press 3$8.
".
F-
6SHHG 'LDO
Before linking Speed Dial Numbers, make sure the System
Administrator has stored the desired number in the System Speed Dial
that you are planning to use.
Regular Pause
".
P-
button or code. Typically, long, frequently
Long Pause
Ten-second pause, which
can be entered anywhere in
the Speed Dial number.
The LCD displays "
3$8/
Press .
Strata DK Electronic Telephone 5/99
".
L-