Speed Dial Pause - Toshiba StrataCT User Manual

Features
Table 7 Feature Access Codes (continued)
4
Pickup any ringing Exchange Line (new call only)
Pickup Station Page or Ringing Door Phone
4
Pickup External Page
Pickup Line on Hold (lines 1~99)
Pickup Line on Hold (lines 100~200)
One-touch Voice Mail Access
Outgoing Calls
1. These codes can be used during an Exchange Line call.
2. Background music speakers can only be turned ON/OFF from Station 200.
3. XXX = Auto Park Orbit 9 9 9 (access the next available park orbit), or General Park Zones 900~919, or
[PDN] on which the call should be parked. Only use 999 with LCD telephones.
4. This feature holds an existing call when the button is pressed. If the button is pressed when not on a call,
pickup or page can still be accessed. These codes can be used during an Exchange Line call.
5. After pressing the feature button, the user dials the line number (01~99) to pickup the line.
6. After pressing the feature number, the user dials the line number (100~200) to pickup the line.

Speed Dial Pause

Some Speed Dial numbers may require a pause (long or regular) or hookflash be included (e.g., tone
delay requires a pause at the beginning of a Speed Dial number).
Hookflash
The MW/FL MW/FL MW/FL MW/FL is programmed to allow a
0.5 or 2 seconds long (set in system
programming) Exchange line hookflash
when inputting Speed Dial numbers. It is
displayed on the LCD as "F-".
Press MW/FL MW/FL
MW/FL MW/FL
...or enter the hookflash dial code
CONF/TRNS + #45 #45).
CONF/TRNS CONF/TRNS #45 #45
(CONF/TRNS
Your telephone must have a PAU
Note
Strata CT Electronic Telephone User Guide November 2001
Features
4
5
6
The pause is either 1.5 or 3 seconds
(set in system programming). The
LCD displays "P-".
Press PAU
PAU key to allow MW/FL PAU PAU
Feature Access Code Sequence
HOLD + [PDN] + 4459 HOLD
HOLD HOLD
HOLD + [PDN] + 4454430 HOLD HOLD HOLD
HOLD HOLD HOLD HOLD
+ [PDN] +
[PDN] + 445 445 + 4470 4470(0 0 0 0 1~99
445 445 4470 4470
[PDN] + 445 445 + 44 447 7 7 7 (100~200
445 445 44 44
[PDN] + Voice Mail [DN]
[PDN] + Exchange Line Access Code, see
Page 100.)
Regular Pause
PAU PAU . PAU
MW/FL MW/FL to be used to store a hookflash in Speed Dial. MW/FL
4459
4459 4459
4454430 4454430 4454430
4454435 4454435 4454435 4454435
1~99)
1~99 1~99
100~200)
100~200 100~200
Table 10
Long Pause
Ten-second pause, which can be
entered anywhere in the Speed Dial
number. The LCD displays "L-".
Press PAU/L PAU/L. PAU/L PAU/L
Speed Dial
on
63