Automatic Busy Redial (Abr) - Toshiba StrataCT User Manual

Features
To call a specific console
Press a [DN] + the
console [DN].
To call all consoles for an emergency
Press [DN] +

Automatic Busy Redial (ABR)

After reaching a busy outside number, you can activate ABR so that the Strata CT system
automatically redials the number at regular intervals. If the system redials an outside number that is
still busy, ABR resets and tries again. This feature may not be allowed on some (or all) lines in your
system—depending on the telephone line type connected.
ABR is not attempted while your station is busy, but continues to time-out.
The system inserts a pause (
ABR ABR ABR ABR
1. Press
CONF/TRNS CONF/TRNS
CONF/TRNS CONF/TRNS
...or
2. Hang up
...or press
3. Lift the handset or press
SPKR SPKR SPKR SPKR
and wait for the party
to answer.
Strata CT Electronic Telephone User Guide November 2001
The call rings the console
Note
#400 #400
#400 #400
. The call rings the
) on your LCD before redialling the number.
P
The LED flashes red.
#44 #44
#44 #44
+ . You hear confirmation tone.
The system redials, up to 15 times,
every 30 or 60 seconds depending on
SPKR SPKR
SPKR SPKR
.
system programming.
Your telephone receives ring tone, when ABR dials the number
if it is available.
The [DN] or Line and SPKR LEDs flash.
If you do not pick up the handset or press
seconds after a connection is made, you hear a muted ring for
another 30 seconds, then the call disconnects.
In-DN In-DN In-DN In-DN
Your System Administrator can provide the
In-DN In-DN
In-DN In-DN
Attendant Console
Emgr Emgr
Emgr Emgr
button on all attendant consoles.
Automatic Busy Redial (ABR)
(incoming [DN] button).
s.
NO. 202
P555 3700
NO. 202
ABR SET
SPKR SPKR SPKR SPKR
within 30
21