Toshiba StrataCT User Manual page 15

The Grand Tour
Buttons
There are two sets of buttons, fixed and flexible. The fixed buttons, such as
TRNS TRNS VOL VOL
TRNS TRNS VOL VOL
, and
numbers (Primary, Secondary, Phantom) and feature buttons. The number of preprogrammed flexible
buttons varies by telephone.
Fixed Buttons
The fixed buttons are located below your dial pad and enable you to perform standard functions
quickly and easily.
Table 1 Fixed Button Instructions
Button
CONF/TRNS CONF/TRNS
CONF/TRNS CONF/TRNS
(Conference/Transfer)
HOLD HOLD HOLD HOLD
Strata CT Electronic Telephone User Guide November 2001
are shown in Figure 1 on the prior page. The flexible buttons consist of directory
Press to set up conference and transfer calls (see
Press once to hold internal or outside calls (the Exchange
Line LED flashes at the internal hold rate)
...or press twice to enable Exclusive Hold. The Exchange
Line LED flashes at the exclusive hold rate.
Note
Exclusive Hold enables you to place a call on hold so that only you or
somebody using a Call Pickup code at another station can retrieve it.
To retrieve a call on hold:
Press Exchange Exchange or [DN] which is on hold Exchange Exchange
...or if the call is on Exclusive Hold, from another station
dial #5 #5 plus your [DN], or dial #5#7 #5 #5
the call is held on.
If a call is not retrieved by a certain time (set in system programming), it recalls back
to your phone. You hear repeated recall tone (or if you are on the phone, you hear
recall tone twice).
Instructions
"Conference Calls" on Page
#5#7 #5#7 plus the Exchange Line number (001~200) that #5#7
Electronic Telephone Diagram
MIC MIC HOLD HOLD CONF/ CONF/
MIC MIC HOLD HOLD CONF/ CONF/
, ,
39).
HOLD LINE 10
JAN 01 SUN 12:19
HOLD LINE 201
LINE 10 RECALL
3