Toshiba StrataCT User Manual page 31

Features
If the system is set for Verified Account Codes, you must enter specific verified codes when entering
the Voluntary Account Code or the code is not validated for the SMDR report.
1. After accessing an
Exchange Line, press
ACCNT ACCNT
ACCNT ACCNT
SDS SDS
SDS SDS
...or
(B1CU~B3CAU/B3CBU)
SDS SDS SDS SDS
...or
(B5CAU/B5CBU)
*
...or
respectively if your
telephone does not have a
SDS SDS SDS SDS
2. Enter the Account Code.
3. Repeat Steps 1 and 2 to
enter more codes.
4. Dial a telephone number.
Strata CT Electronic Telephone User Guide November 2001
50 50
50 50
+
050 050 050 050
+
50 50 050 050
50 50 050 050
or *
button.
Your conversation is not
interrupted.
Note If the Voluntary Account
Code is not required to
dial out, the account code
can be entered during a
call.
When your station is set for
Verified Account Codes, you hear
a half-second confirmation tone if
the code is valid.
The outside party is not able to hear any confirmation tones
when the Account Code digits are being entered. If your
station is programmed not to verify Account Codes, you do
not hear a confirmation tone.
If the code is invalid, you hear two
short tones.
The last code entered is recorded.
Any digits dialled after the code is entered in Step 2 is treated
as part of a telephone number.
Account Code Calls
NO. 204
ENTER ACCT CODE
NO. 204
CODE VERIFIED
NO. 204
CODE NOT VALID
19