Call Forward Remote Destination Change - Toshiba StrataCT User Manual

Features
To cancel a Call Forward–External
CF–EXT CF–EXT CF–EXT CF–EXT
Press
#670 #670
#670 #670
...or [PDN] +

Call Forward Remote Destination Change

If Call Forward-External mode is set at your station, you can change the forwarding destination from
a telephone outside of the system.
1. Call into the CT system over an
Exchange Line programmed
for the DISA feature.
2. Press
[PDN] after you receive dial
tone.
3. Enter the Remote Call
Forward-External security
code.
Strata CT Electronic Telephone User Guide November 2001
SPKR SPKR
SPKR SPKR
+ .
#670 #670
#670 #670
then dial your
You hear ringback tone signal, then internal dial tone for
10 seconds.
Try again if you hear busy tone.
See the System Administrator for DISA
Note
telephone numbers.
You hear a confirmation tone.
If a number is not dialled, the system automatically
makes the DISA Exchange Line ring as a normal
incoming call. Then, if the call is not answered within
15 seconds after the ringing starts, it disconnects.
You hear a confirmation tone. See the System
Administrator for the security code which is assigned to
your telephone in system programming.
Call Forwarding
31