Toshiba StrataCT User Manual page 80

Two (Tandem) Exchange Line Connection
2. Enter an Exchange Line access
code and then the outside
telephone number.
See Table 10
Exchange Line access codes or
ask your System
Administrator.
3. Press
party answers.
...or [DN] to return to the
original connection if you
receive a busy tone/no answer.
4. Press
up.
To connect two outside lines (using a
1. Press
PL PL
PL PL
...or
number.
2. After the party answers,
press
68
on Page 100 for
CONF/TRNS CONF/TRNS
CONF/TRNS CONF/TRNS
after the
CONF/TRNS CONF/TRNS CONF/TRNS CONF/TRNS
and hang-
Line Line
Line Line
Line Line
Line Line
and dial a telephone
CONF/TRNS CONF/TRNS
CONF/TRNS CONF/TRNS
.
The [DN] LED flashes (in-use rate), and all parties are
conferenced.
You hear dial tone before you
hang-up. The [DN] LED flashes
(exclusive-hold rate) and the
two lines are connected.
identify the connected
N2
Exchange lines.
The LED turns OFF when the parties hang-up.
If the public telephone company provides auto
Note
disconnect, the connection may release
automatically when the parties hang up. If not, the
lines must be supervised to be disconnected. See
"To connect two outside lines (using a Line
button)" on Page
button)
You hear dial tone.
You hear dial tone. The Line LED flashes (conference
rate). The new Line LED flashes (in-use rate).
Strata CT Electronic Telephone User Guide November 2001
TRK-TRK N1 N2
JAN 10 THU 11: 57
and
N1
68.
Features