Speed Dial - Toshiba Strata DK User Manual

The Grand Tour

Speed Dial

2. Dial a telephone
number.
3. Speak in a normal
voice level toward the
telephone.
4. Press
To answer an incoming call using speakerphone
1. Press the
with the flashing
LED with the handset
on-hook.
2. Speak at a normal
voice level toward the
telephone.
3. Press
disconnect the call.
Speed Dial
Speed Dial enables you to call a telephone number with a two- or three-digit access
code. There are two types of Speed Dial numbers:
Station—assigned by individual station users to their own station and can only be
dialed from the station that assigns it.
System—assigned only from attendant consoles or a designated station (typically
the System Administrator station), and can be used by other stations. (See System
Administrator User Guide for storing instructions.)
Important!
60
You hear ringback tone or busy tone, if busy.
Note
63.5
. Your call is disconnected.
&2
or [DN] The CO or [DN] LED flashes (in-use) and you are
connected to the call.
63.5
to
If you do not perform the following procedures within a specified time
(set in system programming for either one or three minutes) when
storing speed dial numbers, the operation times out and your telephone
returns to idle mode.
0,&
Your button must be set in system
programming to ON at the start of a call. If not,
0,&
you must press the
Strata DK Electronic Telephone 5/99
button before talking.