Cutting Unit; Lift Lever For Cutting Unit - Husqvarna Rider Pro 15 Operator's Manual

Cutting unit

Rider Pro 15 can be equipped with numerous
attachments.
The BioClip unit finely cuts the lawn by cutting the
grass several times before returning the clippings to
the lawn as fertiliser.
Cutting unit with side ejection or rear ejection, i.e.
the cuttings are ejected from the side or rear of the
unit.
Cutting unit with side or rear ejection, i.e. the grass
cuttings are ejected from the side of, or from behind
the unit.
The Combi unit functions as a BioClip unit when a
BioClip plug is fitted, but can be reset to rear
ejection by removing the BioClip plug.
See "Maintenance \ Checking the Blades" for
identification of the cutting unit.

Lift lever for cutting unit

The lift lever is used to set the cutting unit in trans-
port or mowing position.
1. Pull back the lever to the locked position for
transport.
The cutting unit will lift up and the blades stop
rotating.
2. Press in the lock button and move the lever
forwards for the mowing position.
The unit will lower down and the blades start to
rotate.
3. The lever can also be used to temporarily
regulate the cutting height, e.g. for a small
mound in the lawn.
PRESENTATION
Lifting of the cutting unit
Lowering of the cutting unit
6017-230
6017-129
6017-130
13
English –