Husqvarna Rider Pro 15 Operator's Manual page 59

SERVICEJOURNAL
Work done Date, mileage, stamp, sign
100/200 hour service
1. Change the engine oil. Change the oil filter every 200 hours.
2. Clean / replace the air filter pre-filter (oil-foam element).
3. Clean the paper air filter. Replace every 200 hours.
(more regularly in dusty conditions)
4. Clean the engine cooling air intake and transmission air intake.
5. Clean the cooling flanges on the cylinders and cylinder head.
6. Check/adjust cutting height setting.
7. Check/adjust parking brake.
8. Inspect flame guard/spark arrestor (optional equipment)
9. Clean/replace spark plug.
10. Replace fuel filter in fuel line.
11. Clean the fuel pump air filter.
12. Clean pulse-air filter.
13. Check screw and nuts.
14. Check need for oil change for K62 gearbox (every 500 hours).
57
English –